직경
마이크로 나사 일반 공장에서는 0.8mm로 제작하지만, 소주 안지커우 하드웨어 기술 유한회사에서 생산할 수 있는 가장 작은 나사 직경은 0.6mm입니다. 이러한 종류의 정밀 소형 나사는 초기에는 안경테 위의 브래킷 연결에 주로 사용되었습니다. 이후 휴대폰의 출현으로 휴대폰 회로 기판의 일부 장소에도 사용되었습니다. 표준의 일반적인 사양에서 나사 직경은 3mm 미만이며 마이크로 나사 시리즈에 속합니다.
마이크로 나사는 작지만 생산이 기존 나사보다 더 복잡합니다. 작은 나사의 표면 처리는 큰 나사만큼 편리하지 않고 매우 번거롭기 때문에 작은 나사의 표면 처리를 완료하려면 특수 전기 도금 장비가 필요하며 일반 아연 도금 공장에서는 이를 수행할 수 없습니다.
For M1.2 small screws, if its length is 5 mm, an ordinary small package can hold hundreds of thousands of them, but the number of hundreds of thousands of them, the general production line can not use so much, but the price of small screws is not high, tens of thousands of ordinary materials of small screws, about one thousand yuan, if you go galvanized, The labor cost of the galvanized plant to start - the value of this screw, so don't look at the small screw is not valuable, but it is very troublesome to operate.
작은 나사는 작지만 사용 환경이 매우 고급스럽고 휴대폰, 컴퓨터, 정밀 기기 등 부품에 대한 요구 사항이 매우 높으며 일반적으로 사용되는 산업용 나사보다 훨씬 엄격합니다.
정밀 나사의 전반적인 품질은 전체 산업 발전에 중요한 역할을 하며, 현대 경영 개념 하에서 고정밀 생산 기술의 사용은 기업의 기본 기반입니다.
Suzhou Anzhikou Hardware Technology Co., Ltd. is a screw manufacturer with more than 20 years of experience in customized production, which can be customized according to customer's needs to provide you with suitable fastener solutions.
